Summer is coming. Every girl likes to dress lightly, but she is annoyed by the indecent body hair exposed. Long body hair grows on her armpits, arms, and slender legs. Excessive hair not only affects women. The beauty of the outside brings psychological harm to women to a greater extent. For this reason, some simply shave it off, and some use "depilatory cream" or drug depilation methods, but the result is more and more depilation, which is darker and denser than the original.
So how can hair removal be safer, healthier and more effective? Mu Ning International Beauty Equipment introduces the most advanced OPT painless hair removal equipment to help you solve your worries and let your beautiful summer leave no regrets.
What is opt?
OPT Perfect Pulse Light is an intelligent, non-exfoliative skin reconstruction system integrating epidermal cooling technology, IPL treatment technology and RF radio frequency technology. The core technology OPT, the fourth generation of IPL, perfect pulse technology to achieve uniform energy balance throughout the pulse, professional sapphire cooling technology to improve the effectiveness and safety of treatment, OPT perfect pulse light intelligent combination of the above three technologies, for different skin types Provide targeted treatment plans for skin problems of different patients. Under the premise of fully protecting the epidermis (epidermal cooling technology), the use of IPL technology can uniquely lyse the epidermis; the intelligent combination (IPL+RF) enables the above two energies to be focused on the epidermal mottled pigment clusters and The collagen tissue of the dermis and the dermal papilla of the hair follicle. RF technology provides an energy that evenly heats almost the entire skin layer. At this time, the combined application of the selective photothermal principle of IPL can strengthen the effects of skin rejuvenation, freckle removal and hair removal, and easily achieve skin reconstruction and skin remodeling without obvious pain and side effects. Hair removal.
OPT has good technical advantages and avoids postoperative adverse reactions such as photon, color light, E-light, etc., such as blisters, spot printing, and pigment backflow. It is the safest, most reliable and cost-effective one in beauty salons, plastic surgery institutions, and hospitals. Required equipment.
What is IPL
Intense pulsed light (IPL), referred to as IPL, is a broad-spectrum visible light with a special wavelength and a softer photothermal effect. At first, it was mainly used in the clinical treatment of skin telangiectasia and hemangioma in dermatology.
Intense pulsed light is a continuous, multi-wavelength incoherent light with a wavelength range of 500 to 1200 nm. The intense pulsed light therapy instrument can select the wavelength through the filter, so it has the effect of selectively removing pigment spots, occlusion of blood vessels, hair removal and wrinkle removal. When intense pulsed light is used to treat skin wrinkles, pigmentation, and telangiectasia caused by photoaging, this technique is also called photorejuvenation.
Selective absorption of light + strong heat of light
Multi-wavelength, strong pulse, broad spectrum, color light quantitatively decomposes to form light quanta. After the quantized decomposed light quanta irradiates the skin, it can reach all levels of the skin, decompose abnormal pigment cells, destroy hair follicles, close abnormal blood vessels, and stimulate at the same time Collagen is proliferated and elastic fibers are rearranged to achieve the effects of freckle removal, ER nano-light hair removal, red blood streak removal, and skin whitening and skin rejuvenation. Freckle removal, relying on metabolism to bring abnormal pigments out of the body.
effect:
Anti-wrinkle-effectively eliminate and relieve wrinkles of different degrees on the eyes and forehead;
Skin rejuvenation-shrink pores, improve skin texture, and increase skin elasticity;
Firming-improve the elasticity of the skin and increase the smoothness of the skin;
Whitening-remove freckles, age spots, acne, etc., decompose melanin, and make the skin white.
OPT three-in-one hair removal device hair removal advantages
Hair removal advantage 1
Safe and comfortable: Traditional laser hair removal is painful during treatment. Because the laser has high brightness and high energy density, irradiation treatment is similar to a concentrated exposure of the skin. In order to prevent epidermal damage, there is a special cooling device for freezing hair removal. The process of freezing hair removal is almost painless!
Hair removal advantage 2
The best pulse, the hair will not hurt the skin: the pulse required for the freezing point hair removal effect is related to the thickness of the hair. The thicker the hair, the longer the effect. The laser pulse for hair removal is from 5 milliseconds to 100 milliseconds to obtain the ideal leg hair removal effect. At the same time, it effectively protects the skin from heat damage.
Hair removal advantage 3
Directly hit the hair roots and never regenerate: This method of hair removal can penetrate the epidermis and enter the dermis to completely shrink the hair follicles and hair shafts, resulting in permanent hair removal. The other mouths around the hair follicle do not contain melanin particles, so they do not absorb this laser, which will not cause harm, and is safer and more thorough.
Hair removal advantage 4
The effect is immediate: the freezing point laser wavelength can penetrate to the deep layer of the dermis and subcutaneous fat tissue, acting on different parts and depths of hair follicles, quickly and thoroughly removing hairs at any part and depth of the body.
Hair removal advantage 5
Non-pigmentation: Traditional laser hair removal causes skin pigmentation and inflammation after hair removal, while the function of freezing point laser hair removal is close to perfect. Because of its deep penetration, the epidermis absorbs very little energy, so there will be no pigmentation. .
Hair removal advantage 6
Smooth and delicate skin: Freezing point depilation has the effect of skin rejuvenation. With the proliferation of subcutaneous collagen, the pores after depilation are tightened, and the skin of the body part after depilation becomes smooth and shiny.
working principle
The body hair follicle contains a large number of melanocytes that absorb light in a specific band. Therefore, using the selective photopyrolysis principle of the patented strong pulse light source, the multi-functional OPT beauty instrument is particularly sensitive to the hair follicle melanocytes without damage to the normal epidermis. The light is irradiated to cause the hair follicle to generate heat and selectively destroy the hair follicle. At the same time, the emitted heat is transmitted to the deep part of the hair follicle through the cross section of the hair shaft, so that the temperature of the hair follicle rises rapidly, and the structure of the hair follicle is irreversibly damaged. Hair and hair follicles are removed through a natural physiological process, so as to achieve the effect of permanent hair removal while avoiding damage to surrounding tissues.
Different from traditional hair removal
OPT freezing point hair removal equipment is different from traditional hair removal. Traditional hair removal relies on foreign body coupling agent or cold gel to achieve the effect of local rapid cooling. The freezing point hair removal is completely unnecessary, which also greatly reduces the operating cost of the later beauty salon. The original sapphire probe directly acts on the epidermal skin, which can make the subcutaneous skin temperature instantly reach -4°C, achieving true freezing point painless hair removal.
Compared with the shortcomings of other traditional hair removal methods, the effect of OPT hair removal device freezing point hair removal is more convenient, more comfortable, and has fewer side effects, which can also be understood as no side effects. Hair of different thicknesses can be removed at one time, whether it is slender lip hair, face hair, or thick hand hair, leg hair, chest hair, and even the bikini line in the private part, it can help you easily remove it. OPT instrument The hair removal process is comfortable, almost no pain, only a slight tingling sensation, almost negligible, these advantages are not comparable to traditional methods such as electric acupuncture or beeswax hair removal.
Instrument accessories
HR probe operation items
Freezing point hair removal (hair removal):
Use the perfect pulsed light with a wavelength of 530nm-1200nm to act on human skin hairs of different depths. The filtered pulsed light is easily absorbed by the melanin in the hair and hair follicles and converted into heat energy. The heat energy makes the hair shaft and hair follicle heat up quickly. When the temperature reaches Above 60°C, it will cause hair splitting, hair follicle degeneration, dermal papilla destruction, hair growth cell death, and eventually the original hair will fall off, and the growth of new hair will be delayed, thinned, and lightened until it stops growing. But it does not affect sweat glands.
Operating time: 20 minutes 30 days/time
Hair removal on small parts (such as liquid hair, lip hair, hairline), apply gel, stick the probe close to the skin, press the light-emitting button once and the beam moves to the next place and press it again, like a stamp,
1. The best effect is when the energy is adjusted until the guest has a tingling sensation, and the guest's skin is a little red, which is about 5-7 times.
2. Do not stay in the same place on the skin and hit continuously,
3. The probe must be close to the skin, otherwise the virtual contact may be too hot.
Depilation of large parts (such as arm hair, chest hair, large and small legs) apply gel, the probe sticks to the skin, keep pressing the handle light button, sliding on the skin in order to move, you can use the cross method, hit the horizontal, and then hit Vertical,
After the hair removal operation, the hair follicles and the naked eyes have not changed much before the operation, that is, you will see the burrs still there, but don’t worry, the hair will become shorter and shorter after one month, thinner and more repetitive. No more hair will grow after the first treatment,
SR probe operation items
1, freckle
l Perfect pulsed light waves act on the skin. Because the content of pigment clusters in diseased tissues is much higher than that of normal skin tissues, after absorbing pulsed light, the light energy absorbed by diseased tissues is much higher than that of normal skin, and the pigments are broken and decomposed. It absorbs less light and heat without damaging normal skin tissues, and the light-absorbing melanin appears to scab in the late stage of the epidermis.
Note: It can only treat epidermal spots such as freckles, sunburn, age spots
Deep spots: chloasma, Ota nevus, and zygomatic mother spots cannot be done, because OPT light is scattered, and flaky spots will absorb a large area of light. It is recommended not to do it, or use a point-to-point laser to remove it, such as a picosecond laser.
Operation time: 30 minutes 45-60/time 3 times/course
(1) Remove makeup for 2 minutes (Mild makeup remover)
(2) Clean for 2 minutes (moisturizing cleanser)
(3) The spots must be analyzed first, only epidermal spot-like spots, such as freckles, sunburns, (skin tester) 5 minutes
(4) Apply gel, stick the probe to the skin with spots, press the light-emitting button once and move the beam to the next place and press it again, like a seal, (gel) for 10 minutes
Note: The energy can be adjusted to the guests' obvious irritating sensation, and the guests' skin will be a little red, and the spots will be deeper than before. The best effect can be stopped, and only the spots with spots will be operated.
(5) After the operation is completed, wipe off the gel, apply a mask, and apply repair water and repair cream (regeneration repair water and repair cream) for 2 minutes
2. Photorejuvenation (for dark yellow, oily, and enlarged pores skin)
l Use perfect pulsed light and RF radio frequency to stimulate the fibrillation tissue of the skin dermis layer with a depth of 15MM. The energy provided by RF technology almost uniformly heats the entire skin layer, promotes collagen proliferation, achieves skin rejuvenation and whitening, shrinks pores, and improves facial relaxation ；
Operation time: 45 minutes 3 times/course 30 days/time
(1) Remove makeup for 2 minutes (Mild makeup remover)
(2) Clean for 2 minutes (moisturizing cleanser)
(3) Apply gel, press the luminous button once and the beam moves to the next place and press again, like a stamp, operate the entire face, 15 minutes (gel)
Note: The light spot cannot be applied to the eyebrows, eyes, lips, but can only be applied to the skin that can be operated.
(4) The best effect is to adjust the energy to the guests' tingling sensation. Operate the whole face about 5 times.
(5) After the operation, you can apply a moisturizing mask for 20 minutes (EGF mask)
(6) Apply 8 water, regeneration essence, moisturizing lotion, regeneration facial cream, revitalizing eye cream, sunscreen for 2 minutes
You can make up normally when you finish doing it
3. Assist in removing acne
l Use the specified wavelength of light energy to reduce the active propionibacteria of the sebaceous glands while eliminating the pigmentation, stimulating the proliferation of deep collagen, and achieving a good effect of treating acne
Preoperative inspection
l Ask the guests if they have photosensitivity. A small number of people may experience redness, swelling and itching when exposed to the sun. This phenomenon cannot be used as an optical instrument;
Photon therapy can only be done once in the same area within a month. Do not repeat treatment within one month;
Scarring physique cannot be used for freckle removal, the skin will have tiny scabs after the freckle removal by optical instruments;
The treatment light should avoid reflective mirrors and eyes. Jewelry, watches and other accessories should not be worn during the treatment process;
Open wounds, cystic acne muscles, dense red blood streaks, moles, and pigments on the face that are easily injured, do not operate or bypass;
Severe three highs (high blood fat, high blood pressure, high blood sugar), three stages (physiological period, pregnancy, lactation) not to do;
Patients with major diseases, such as heart disease, with a pacemaker, or patients with diabetes, do not do it;
Not for allergic skin, vitiligo, lupus and other skin diseases;
Avoid facial plastic surgery;
Those who have used other methods (such as wax removal) for hair removal within 6 weeks are not recommended for treatment;
I don’t do anything that I’ve done in the past 10 days or so
Those who have used other methods (such as wax removal) for hair removal within 6 weeks are not recommended for treatment;
In the recent 10 days or so, I have not done anything that I have experienced.
Tuning parameters
The core of parameter adjustment: The adjustment of parameters is a gradual process from shallow to deep according to the customer's feeling, so as to maximize the safety effect; the pigment problem is mainly about regulating energy, and the skin rejuvenation problem is mainly about regulating energy and RF. Too high energy guests can’t accept it as causing burns, remember!
Professional mode
First pulse: pulse width: refers to the duration of each sub-pulse (heat penetration time) of the millisecond (ms) pulse light, referred to as pulse width. The longer the pulse width, the deeper the heat penetration, but the less heat is distributed in a single layer of skin. The first value is the first pulse, which refers to the width of the first pulse in the pulse train, and the next two values are sub-pulses.
Pulse delay: also known as pulse interval, refers to the time interval between sub-pulses, in milliseconds (ms); the longer the pulse delay, the more thorough the skin cooling, but the temperature of the lesion will also decrease.
Number of pulses: refers to the number of sub-pulses contained in the pulse train
Course of treatment
project
Course of treatment / course of treatment
Intervals
Hair removal (fine hair)
5-8 times
1-2 months/once
Hair removal (coarse hair)
4-6 times
1-2 months/once
Photorejuvenation
3 times
1 / once
Freckle
3 times
45-60 days/once
Operating procedures
1. Preheat the probe for 3 minutes before starting the machine. The machine needs to run the water circulation cooling system to cool the treatment head (frosting or condensation).
2. Clean the probe, first disinfect with wine, and then wipe off the wine ingredients with saline
3. Shave (do not shave too clean, a little bit of burr is better to absorb light)
4. Wear protective glasses for the guests, and the operator should wear special shading glasses
5. Foam gel, about the thickness of a coin, has the function of relieving heat, guiding light and lubricating
Postoperative care
1. After the treatment, the customer should leave for observation for 10 minutes.
2. Instruct customers to stay indoors as much as possible within a month, and do not bask in the sun (because finishing the optical instrument is equivalent to shining a very strong light, the sun is also light, and absorbing the light again will harm the skin,) go out to open an umbrella, wipe Sunscreen with SPF30 or higher.
3. Do not use the sauna for a week after treatment, and do not touch overheated hot water in hot springs and operating parts. Pay attention to ventilation and heat dissipation.
Do not apply makeup for one or two days after the freckle and scab fall off. Do not apply any cosmetics on the treated area during the scab period. Stop using other freckle products within three months of skin care products and anti-freckle items.
4. For freckles, avoid eating spicy, seafood, pigmented, photosensitive foods and other stimulating foods
5. Do not touch water for 3-4 days for freckle removal, pay attention to cleaning (use normal saline or distilled water for wiping to keep the treated area clean and fresh)
6. There is itchiness during the period of freckle removal and scab formation. Do not buckle and scratch with your hands to let the scab fall off naturally.
7. Do not use the sauna and exercise vigorously during the scab period
8. Do moisturizing care after freckle removal (such as applying facial mask)
Warning description
1. Turn off the machine for more than 2 hours and let the instrument rest for 20 minutes.
2. The number of shots used by the probe handle is 100,000 times. If the number of shots is used up, you can ask our company to buy the tip.
3. The strong light hazard reminder refers to that the strong light from the front of the treatment head illuminates the eyes, which is prone to danger; the operator is required to wear protective goggles during operation, and protect the operator to avoid direct glare to human eyes.
4. The water tank of the instrument must be filled with water before use.
5. When different function options need to be changed, the machine should be in standby state (the standby button is red), and the function options cannot be changed in the ready state.
[Statement]: Low temperature area below 0℃
6. If the instrument is not used for a long time or needs to be used in a different venue, the water inside (handle and host) must be drained.
7. Try not to place the instrument in an environment lower than 0°C for more than 3 hours. Research has found that water below 0°C will'explode' when moving, and it turns into liquid water below 0°C. There will be rapid freezing during the movement. After the liquid water turns into solid ice, the volume increases rapidly, causing certain damage to the water pipe, the internal waterway of the cooling fan, and the laser waterway.
